Select Your Vehicle
Rebuild/Upgrade Service for Chevy SSR Convertible Hydraulic Components

Chevy SSR

  • The Chevy SSR has eight hydraulic cylinders to actuate and lock the cover, and to actuate the top and cover extension: - Two top lift cylinders - Two locking cylinders for the storage (tonneau) cover latches - Two lift cylinders for the storage (tonneau) cover - Two lift cylinders for the storage cover extension lid. (The top latch above the windshield is electric.) The hydraulic cylinders are connected to the hydraulic pump via hydraulic hoses. Top Hydraulics manufactures new hydraulic hoses out of superior material, and Top Hydraulic s can rebuild your SSR folding top hydraulic pump.

  • Unfortunately, the seals in the hydraulic cylinders deteriorate with time, and the service life of the original seals can be less than ten years in warm climates. This decay is a chemical reaction that gets accelerated by high temperatures or by additives to the hydraulic fluid. Each cylinder has four static seals that seal the front and rear caps and the hydraulic line ports, plus a rod seal that seals the moving metal rod to the cylinder body, plus a piston seal that prevents internal leaks and transfers the hydraulic pressure from the pump into movement of the cylinder's piston. Typically, you will see your hydraulic cylinders leaking first at the bottom, where you wouldn't expect it. The first thought will be that an o-ring on the hydraulic line must be defective. It is actually the first sign that all seals need to be replaced. Seal replacement is absolutely not a DIY job, because the cylinders are crimped together. It requires special machinery to disassemble and reassemble these cylinders, plus all four internal seals have special shapes and sizes. The internal seals are not available to the public. Only the port seals (sealing the hydraulic lines to the cylinder body) are standard o-rings, but they do not normally fail unless they get damaged upon hydraulic line installation.

  • Top Hydraulics manufactures its own internal seals for your SSR hydraulic cylinders. They are a clear improvement over the original seals both in material and geometry. For example, the tiny flat rod seals get replaced with much larger cup seals, which will stay elastic much longer and are more forgiving towards scratches or impurities on the polished cylinder rods. In the extremely rare cases that a cylinder shaft got rusty or damaged by a tool during a futile DIY repair attempt, Top Hydraulics can replace the shaft with a hardened stainless steel version from its own production (for a surcharge).

  • You send us the cylinder(s) you need to have upgraded, and we will turn them around and ship them back to you. We use the best seals available, far exceeding OEM quality, and making your old cylinders truly better than new OEM cylinders.

Chevy SSR

Grid
List

There are 30 products.

Grid
List
Showing 1-30 of 30 item(s)

Order a complete, upgraded Chevy SSR top hydraulic system from our inventory.  Includes the full set of cylinders, the hydraulic pump unit PLUS a new full set of Top Hydraulics' upgraded hydraulic hoses.  The top system ships filled, fully bled and with the travel sensors already mounted to the cylinders for quick and easy installation.

The price shown includes a refundable $1500 deposit.

2 weeks lead time

Price
$5,995.00
Quick view

Complete Top Hydraulic Upgrade for Chevrolet SSR | 2003-2006

Includes Rebuild Service for the full set of cylinders and the hydraulic pump unit PLUS a new full set of Top Hydraulics' upgraded hydraulic hoses.

Price
$3,999.00
Quick view

Brand new travel sensor for SSR convertible top cylinders. There are seven of these particular sensors in your top system.

This single sensor comes with about 12" of wire to splice into your vehicle's existing wiring harness.

Used in roof panel cylinders 89044556, 89044555, 89044554 and latch cylinders 88980812

Price
$69.95
Quick view

There are two options for placing your order:

1. (Most affordable) You send in your malfunctioning Chevy SSR Hydraulic Pump, and Top Hydraulics rebuilds it.

  • The rebuild includes electric motor replacement or rewinding if necessary, service of hydraulic valves, and upgrade of internal seals in the pump to eliminate current or future pressure loss or internal bypass. Three years warranty.

OR

2. (Fastest) Expedited Core Exchange Option where Top Hydraulics ships parts from our inventory first

($700 plus a $300 Refundable Core Charge).

  • Option 2 means that you get a rebuilt & upgraded pump from Top Hydraulics' inventory first, then you ship back your original pump for credit of your $300 core refund.Top Hydraulics ships the pump filled with fluid for plug-and-play installation. You get a pump that has been rebuilt to outlast and outperform OEM replacements.
  • P/N: 1600223 or 15126283

Price
$600.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top. Core exchange is currently not available. You send us the full set of 8 cylinders you need to have upgraded. We use the best seals available, far exceeding OEM quality.

Chevy part numbers

88980812
89044554
89044555
88980385
89044556
88980930

Price
$1,000.00
Quick view

Chevy SSR Full Set of Hydraulic lines/Hoses

 

 

Full set of upgraded hydraulic lines, manufactured in the USA by Top Hydraulics out of superior hose material, with plated fittings. Burst pressure rating over 23,200 psi. Always in stock.

 

Price
$1,999.99
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top.  Core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, and we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

88980385

Price
$150.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top.  Core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, and we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

89044556

Price
$150.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top. Core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, and we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

88980930

Price
$150.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top. Up-front shipping aka core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

89044555

Price
$150.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top. Up-front shipping aka core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, and we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

88980930

Price
$150.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top.  Core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, and we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

89044554

Price
$150.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top.  Core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, and we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

88980812

Price
$150.00
Quick view

The Chevy SSR has eight hydraulic cylinders that actuate and lock the cover and top.  Core exchange is currently not available. You send us the cylinder(s) you need to have upgraded, and we will rebuild them to better-than-new condition using the best seals available, far exceeding OEM quality.

Chevy part number:

88980812

Price
$150.00
Quick view

Upgraded Hydraulic Line #11 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the left side Main Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #12 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the left side Main Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #13 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the right side Main Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #14 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the right side Main Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #31 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the left side Tonneau Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #32 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the left side Tonneau Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #33 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the right side Tonneau Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #34 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the right side Tonneau Lift cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #51 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the left side Tonneau Lock cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #52 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the left side Tonneau Lock cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #53 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the right side Tonneau Lock cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #54 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the right side Tonneau Lock cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #61 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the left side Tonneau Flipper cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #62 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the left side Tonneau Flipper cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #63 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the shaft end of the right side Tonneau Flipper cylinder to the Hydraulic Pump.

Price
$149.99
Quick view

Upgraded Hydraulic Line #64 manufactured by Top Hydraulics, Inc. for Chevy SSR Convertible.  This line runs from the bottom end of the right side Tonneau Flipper cylinder to the Hydraulic Pump.

Price
$149.99
Quick view