Left Bow Tension Cylinder - Chrysler Crossfire
$200.00
The OEM cylinders will all eventually fail due to chemical decay - Top Hydraulics upgrades the seals with far superior material.
Send in your left bow tension cylinder to be upgraded, using the best seals available.
P/N 5142640AA or 1757-038-B
Rating:
Be the first to write a review!
No sales tax for orders in the USA
We provide world class technical support
3-year standard warranty (should last decades)
Chrysler Crossfire Left Bow Tension Cylinder aka Support Cylinder
Send in your left bow tension cylinder to be upgraded, using the best seals available.
The OEM seals will all eventually fail, accelerated by heat and impurities or water in the hydraulic fluid - Top Hydraulics replaces the chemically decaying seals with far superior material. We upgrade a total of six seals in this cylinder. You send in your cylinder(s), and we turn them around quickly.
Note: retract the polished shaft on the cylinder before removing the hydraulic line clips. Otherwise, an accidentally slipping tool may scratch or dent the polished shaft so deeply that we need to replace the shaft at a surcharge.
If your cylinder has a white ring of corrosion at the top of the shaft where it meets the clevis then it likely has some rust damage.
The corrosion and rust damage is most often caused by water intrusion due to a failed weather seal on the vehicle.
If your cylinder has a rust-damaged shaft we can replace it, but there is an additional charge of $100 for a replacement shaft.
See the photo below for an example:
Please note: Our rebuild/upgrade service does not include service or replacement of the travel sensor(s). If you do need a replacement sensor, we sell OEM sensors for $50 each.
| 5142640AA |
Specific References
Reviews (0)
The OEM cylinders will all eventually fail due to chemical decay - Top Hydraulics upgrades the seals with far superior material.
Send in your left bow tension cylinder to be upgraded, using the best seals available.
P/N 5142640AA or 1757-038-B