

Special Option: Order from our stock with core exchange. Price includes $200 refundable core deposit.
Ferrari p/n 66454300
Better than new inside, with all upgraded seals (including port seals where the hoses go in) and new hoses
No sales tax for orders in the USA
We provide world class technical support
3-year standard warranty (should last decades)
Right Rear Guard Cylinder Rebuild/Upgrade
P/N: 66454300
Model year '04-'09 F430's have seven hydraulic cylinders for soft top actualtion and latching. Top Hydraulics upgrades the internal seals with far superior material, making your cylinders better than brand new ones.
Top Hydraulics replaces all seals in these cylinders. In particular, the port seals are replaced with special-shaped Viton seals, because the OEM seals do not hold up to the heat from the nearby engine.
Five of the cylinders have the hydraulic lines permanently attached, and they need to be sent in with the lines attached. If you have a cylinder with a cut hydraulic hose, then Top Hydraulics can replace the hose.
Two of the cylinders have removable lines (the Secondary Frame Top Seal Cylinders high up in the frame). Remove the clamps and send in these cylinders without the lines. Top Hydraulics will also replace the port seals (where the lines go in) on these cylinders p/n 66454000 and 66454100.
Please note that most cylinders fail in pairs, and that all seven cylinders will usually fail in a time frame of some 20% of the age of the first cylinder failing. That means, for example: if the first cylinder fails after ten years, then you are very likely to find the rest failing within some two years.
Note: in the unlikely event that there is rust on the chromed cylinder shaft, there will be an additional charge for replacing the cylinder shaft.
66454300 |
Core exchange is currently not available - your cylinders need to be sent in first for rebuild service. We use the best seals available, far exceeding OEM quality. Price is per cylinder.
New hydraulic hose (also known as line or pipe), far exceeding OEM specs. 10,000 psi working pressure, 25,000 psi burst pressure, long-lasting, easy to install. The best hoses for the application, at the best price. Ferrari does not sell all hoses as a set - consider getting the full set from us.
Core exchange is currently not available - your cylinders need to be sent in first for rebuild service with 1-3 days turn around. Using the best seals available, far exceeding OEM quality. Ferrari part number 81860800 L.H. TC PISTON KIT.
You send us your electrohydraulic control unit (AKA hydraulic pump), and we will turn it around in 1-3 days. Using the best seals available, far exceeding OEM quality.
Core Exchange is available with an additional $1500 deposit and $200 inventory surcharge
New hydraulic hose (also known as line or pipe), far exceeding OEM specs. 10,000 psi working pressure, 25,000 psi burst pressure, long-lasting, easy to install. The best hoses for the application, at the best price. Ferrari does not sell all hoses as a set - consider getting the full set from us.
Core exchange is currently not available - your cylinders need to be sent in first for rebuild service with 1-3 days turn around. Using the best seals available, far exceeding OEM quality. Ferrari part number 81859300 "LH FRONT ROOF PISTON KIT". This is the driver side cylinder that actually lifts the roof assembly.
Core exchange is currently not available - your cylinders need to be sent in first for rebuild service. We use the best seals available, far exceeding OEM quality.
Core exchange is available as a special option on the previous page. YCore exchange is currently not available - your cylinders need to be sent in first for rebuild service. We use the best seals available, far exceeding OEM quality.
Price is per cylinder.
Special Option: Order from our stock with core exchange.
Includes $200 refundable core deposit.
Ferrari p/n: 66454700
Core exchange is currently not available - your cylinders need to be sent in first for rebuild service. We use the best, longest lasting seals available, far exceeding OEM quality.
Ferrari part number 70003529 RH Capote Cylinder.
New/upgraded hydraulic hose (also known as line or pipe) made by Top Hydraulics, far exceeding OEM specs. 10,000 psi working pressure, 25,000 psi burst pressure, long-lasting, easy to install. The best hoses for the application, at the best price.
Special Option: Order from our stock with core exchange. Price includes $200 refundable core deposit.
Ferrari p/n 66454200
Better than new inside, with all upgraded seals (including port seals where the hoses go in) and new hoses
New hydraulic hose (also known as line or pipe), far exceeding OEM specs. 10,000 psi working pressure, 25,000 psi burst pressure, long-lasting, easy to install. The best hoses for the application, at the best price. Ferrari does not sell all hoses as a set - consider getting the full set from us.
New hydraulic hose (also known as line or pipe), far exceeding OEM specs. 10,000 psi working pressure, 25,000 psi burst pressure, long-lasting, easy to install. The best hoses for the application, at the best price. Ferrari does not sell all hoses as a set - consider getting the full set from us.
Send in your cylinder first for rebuild & upgrade service. Look for the special core exchange option if you want a part shipped first from Top Hydraulics' inventory.
Ferrari p/n 66454300
We make this part better than new inside, with all upgraded seals (including port seals where the hoses go in) and new hoses
Note: in the unlikely event that there is rust on the black, polished cylinder shaft, there will be an additional $100 charge for replacing the cylinder shaft.
Core exchange is currently not available - your cylinders need to be sent in first for rebuild service. We use the best, longest lasting seals available, far exceeding OEM quality.
Ferrari part number 70003529 RH Capote Cylinder.