Rebuild Service for '03-'09 Mercedes Benz W209 CLK-Class Hydraulic Pump  2098000148 aka A209 800 01 48
  • Rebuild Service for '03-'09 Mercedes Benz W209 CLK-Class Hydraulic Pump  2098000148 aka A209 800 01 48
  • 2098001172 2098000972 2098001272 2098000872 2098000772 2098000148

Rebuild Service for '03-'09 Mercedes Benz W209 CLK-Class Hydraulic Pump

$600.00

Hydraulic Pump rebuild Service For '03-'09 Mercedes-Benz W209 CLK-Class

 

 

 

You send in your malfunctioning convertible hydraulic pump for rebuild/upgrade service.

The turn around time is 1-2 days for rebuild service, and we will ship the pump back to you by Priority U.S. Mail (2-3 days delivery time inside the US).

Mercedes p/n 2098000148, 2098000248, 2098000548, 2098000648

Quantity

 

No sales tax for orders in the USA

 

We provide world class technical support

 

3-year standard warranty (should last decades)

Rebuild/upgrade includes:

- Two new relays

- Service of electric motor and solenoids

- Upgrade of internal components in motor's electronics

- Replacement of electric motor if needed

- Upgrade of pump seals

- Thorough check of pump pistons (and replacement if necessary)

- Service and upgrade of internal valves

- Extensive final testing for output pressure, output flow, valve function, thermal behaviour, etc.

 

There may be a surcharge if the pump has been abused, or in a fire, or in water.

 

Pump part numbers for reference, depending on W209 model:

2098000148 aka A 209 800 01 48
2098000248 aka A 209 800 02 48
2098000548 aka A 209 800 05 48
2098000648 aka A 209 800 06 48

Part numbers displayed on the pump's sticker:

2098000030 or A 209 800 00 30

2098000330 or A 209 800 03 30

2098000130 or A 209 800 01 30

2098000530 or A 209 800 05 30

2098000630 or A 209 800 06 30

For motor replacement, Top Hydraulics rewinds original CLK pump electric motors with heavier gauge copper wire and more wire loops, which results in less current drawn for the same output power and much less heat developed. In practical terms, this means the following:
1) You can cycle the top continuously for more cycles before the motor overheats,
2) the temperature sensor inside the pump has more time to signal overheating to the soft top controller, and
3) less current drawn by the motor makes a future relay failure less likely (of course, we install new high-current relays on each pump rebuild that we ship back).

International customers, please send your pump without the mounting bracket, and we can return ship in an International Express Mail Box (Express Mail Box is recommended for faster service - it is on average one week faster than Priority Mail - see https://www.tophydraulics.com/72-international-shipping.html). As of 2016, the US Postal Service does not offer the $80 Express Mail Flat Rate Box any more, and return shipment to some countries costs us more than $80. If you ship your pump to Top Hydraulics without the mounting frame, then Top Hydraulics will honor the $80 return shipping rate. In practice, we return ship most pumps internationally via FedEx, which is yet faster and we will usually charge only the $80 Express Mail postage, anyway. 

W209diagram.jpg

2098000148 2098000548 2098000648

Specific References

Related Products:

New hydraulic line # 14 for Mercedes W209 CLK-Class

This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 02 81.

Goes from the pump to the bottom of the right main lift cylinder (top drive cylinder).

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Price
$149.99
Quick view

Goes from the pump to the bottom of the right storage cover lift cylinder.

This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 06 81. 

Comes with o-ring, snap ring, and snap ring installation tool for installation on the pump end. 

There is no o-ring required for installation on the cylinder end, and you can re-use the original hydraulic line clip.

Price
$149.99
Quick view

Rebuild/upgrade service for your Mercedes W209 CLK Class front lock cylinder. You send in your cylinder for rebuild, or you pick the up-front shipping option which adds $30 surcharge plus $120 refundable deposit.

The front lock cylinder is usually the first to fail, and the remaining six in the rear will follow shortly...

Mercedes part number A 209 800 11 72 aka 2098001172 or A 209 800 11 72 64

Price
$150.00
Quick view

Rebuild & upgrade service for Mercedes CLK A209/W209-Class 

LH Top Drive (Main Lift) Cylinder

Mercedes part number 2098000772 aka A209 800 0772 64. Mercedes does not put this part number on the cylinders.

Top Hydraulics makes these parts better than new inside, with seven new, superior seals and reinforcement against the occasional "explosion" known to happen on OEM cylinders' bottoms.

Core exchange available - see below

Price
$150.00
Quick view

New hydraulic line # 23 for Mercedes W209 CLK-Class

This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 04 81.

Goes from the pump to the top of the right bow tension cylinder 2098000972.

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Price
$149.99
Quick view

New hydraulic line # 11 for Mercedes W209 CLK-Class

This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 01 81

Goes from the pump to the top of the left main lift cylinder (top drive cylinder).

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Price
$149.99
Quick view

New hydraulic line # 12 for Mercedes W209 CLK-Class

This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 01 81

Goes from the pump to the left main lift cylinder 2098000772 bottom port.

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Price
$149.99
Quick view

Goes from the pump to the top of the left storage cover lift cylinder.

This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 05 81. 

Comes with o-ring, snap ring, and snap ring installation tool for installation on the pump end.

There is no o-ring required for installation on the cylinder end, and you can re-use the original hydraulic line clip

Price
$119.99
Quick view

New hydraulic line # 66 for Mercedes W209 CLK-Class

Goes from the pump to the bottom line port on the front lock cylinder.

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Comes with snap ring installation tool for installation on the pump end.

Price
$149.99
Quick view

Order a rebuilt and upgraded hydraulic pump from our inventory, and send your old one back for a $300 core refund.

Note: Ships without mounting frame

Mercedes p/n 2098000148, 2098000248, 2098000548, 2098000648

Price
$900.00
Quick view

Send in your part first for rebuild and upgrade service.

OR

Order from our stock with core exchange with additional $50 surcharge and $160 refundable deposit.

Contact us if you have an '03 or early '04 model CLK with the last six digits less than 009490

P/N 209 800 12 72

Price
$200.00
Quick view

New hydraulic line # 13 for Mercedes W209 CLK-Class

This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 02 81.

Goes from the pump to the top of the left main lift cylinder (top drive cylinder).

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Price
$149.99
Quick view

New hydraulic line # 24 for Mercedes W209 CLK-Class

This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 04 81.

Goes from the pump to the bottom of the right bow tension cylinder 2098000972.

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Price
$149.99
Quick view

goes from the pump to the top of the right storage cover lift cylinder.

This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 06 81. 

Comes with o-ring, snap ring, and snap ring installation tool for installation on the pump end. 

There is no o-ring required for installation on the cylinder end, and you can re-use the original hydraulic line clip.

Price
$149.99
Quick view

Rebuild & upgrade service for Mercedes CLK A209/W209-Class 

Fabric Bow Tension Cylinder

Mercedes part number 2098000972, aka A209 800 09 72

Top Hydraulics makes these parts better than new inside, with seven new, superior seals and reinforcement against the occasional "explosion" known to happen on OEM cylinders' bottoms.

Core exchange is available, see below

Price
$150.00
Quick view

New hydraulic line # 21 for Mercedes W209 CLK-Class

This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 03 81.

Goes from the pump to the top of the left bow tension cylinder 2098000972. 

Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.

Price
$149.99
Quick view