Rebuild/Upgrade Service for W220 S-Class Hydraulic Trunk Lifting Cylinder

New product

Rebuild/Upgrade service for your W220 S-Class Hydraulic Trunk Opening/Closing Cylinder. Part of Mercedes-Benz p/n 2208000048 pump/cylinder assembly. Send in your part first, or select optional up-front shipping (aka core exchange).



For optional up-front shipping (also known as core exchange), select YES in the drop down menu above

Hydraulic Cylinder Rebuild/Upgrade $180.

Top Hydraulics replaces the original seals with a far superior material. The cylinder is part of pump assembly p/n 2208000048 aka A 220 800 00 48. Remove the cylinder from the pump and send it to Top Hydraulics for upgrade service. Do not cut the lines - they unbolt at the pump. There is a surcharge of $50/ea. for damaged lines. In the rare event that the polished cylinder shaft has rust on it, Top Hydraulics can replace the shaft with a polished and hardened stainless steel shaft for an additional $100.

Up-front shipping is available for W220 S-Class Trunk Opening/Closing Cylinders for $200 plus $150 refundable core deposit. If the returned core should have damaged lines, then $50 per damaged line will be retained. If there should be irreparable damage from rust or tool on the cylinder housing or shaft, then the core refund will be handled on a case-by case basis.


For international customers: check our international shipping section here. The pump or pump with cylinder ships in a medium box; the cylinder ships in a flat rate envelope.