Special Option: Core Exchange for Pair of Bow Tension Cylinders
$850.00
This is a special Core exchange option only.
We ship you a pair of E46 Bow Tension Cylinders from our inventory, and you send us back your old parts for a refund of your $300 deposit.
NOTE: If you have a 2003 model, we will need to know if your left bow tension cylinder has a detachable (clip-on) aluminum line fitting before you place your order
No sales tax for orders in the USA
We provide world class technical support
3-year standard warranty (should last decades)
This is a special Core exchange option only.
We ship you a pair of E46 Bow Tension Cylinders from our inventory, and you send us back your old parts for a refund of your $300 deposit.
Please see removal instructions for all cylinders and the most frequently failing hydraulic lines in our DIY section: https://www.tophydraulics.com/content/7-diy-instructions.
See removal instructions https://www.tophydraulics.com/e46bowcylinders.pdf in our DIY section. You remove your cylinders you would like to have rebuilt, and send them to us. Core exchange (from our stock) is available ONLY for full sets of BMW cylinders. See removal instructions in our DIY section.
NOTE: There was a change in cylinder design in 2003, depending on country. Earlier model years have the detachable aluminum piece on the left side bow tension cylinder, which has the hydraulic lines permanently attached to it. This version is shown in the above picture. Newer model years have the hydraulic lines individually detachable from the left bow tension cylinder. In newer versions, lines 31 and 34 going to the valve block can be removed individually. Older and newer version bow tension cylinders (aka tension bar cylinders) are fully interchangeable as pairs, but not individually.
The right side cylinder always has the lines permanently attached, and the lines can be removed from the left side cylinder (clip on old version and T10 Torx bolt on new version).
P/Ns 54347025599, 54347025600
International shipping: One or two of these cylinders can be return shipped in an International Priority Mail or Express Mail Envelope (we box them up inside the envelope).
| 54347025599, 54347025600 |
Specific References
Related Products:
You send us your pump to be rebuilt and upgraded. Includes replacement of electric motor if needed, overhaul of valves and internal parts of the pump assembly to exceed manufacturer's specs, a full bench test for flow, pressure, and thermal behavior. Ships filled with fluid for plug and play installation.
Expedited core exchange option is available and includes a $30 inventory surcharge + $150 core deposit.
BMW p/n 54348410305
840722402
HB70095-002
Price
$350.00
Rebuild/Upgrade Service for Right Soft Top Lid Cylinder for BMW F23 2-Series.
Send in your part(s) first, or select "Order now with core exchange" to order from our inventory. Core exchange orders are subject to a $50 inventory surcharge as well as a $120 refundable core deposit.
Replaced and improved rod seals, piston seals, cap seals, gland seals, wipers, and port seals make these parts better than brand new ones, with an expected service life of 30-50 years under normal circumstances.
P/N: 54347421826
Price
$200.00
Rebuild/Upgrade Service for the full set of BMW F23 2-Series.
Send in your cylinders first, or select "Order now with core exchange" to order a set from our inventory. Core exchange orders are subject to a $200 inventory surcharge as well as a $600 refundable core deposit.
Replaced and improved rod seals, piston seals, cap seals, gland seals, wipers, and port seals make these parts better than brand new ones, with an expected service life of 30-50 years under normal circumstances.
Price
$1,000.00
Rebuild/Upgrade Service for Right Tension Rod Cylinder for BMW F23 2-Series.
Send in your part(s) first, or select "Order now with core exchange" to order from our inventory. Core exchange orders are subject to a $50 inventory surcharge as well as a $120 refundable core deposit.
Replaced and improved rod seals, piston seals, cap seals, gland seals, wipers, and port seals make these parts better than brand new ones, with an expected service life of 30-50 years under normal circumstances.
P/N: 54347421760
Price
$200.00
You send in your malfunctioning E46-Series hydro unit, and Top Hydraulics rebuilds it. The rebuild includes electric motor replacement or rewinding if necessary, service and check of all internal pump components, upgrade of internal seals in the pump, and full bench test to assure that factory specs are exceeded. Three years warranty.
p/n 8 234 530 or 54347025595 or HB70346-002
Price
$500.00
You send in your malfunctioning BMW F12 6-Series hydraulic pump unit, and Top Hydraulics rebuilds it. The rebuild includes electric motor replacement or rewinding if necessary, service of hydraulic and solenoid valves, service of moving parts and replacement as necessary, upgrade of internal seals in the pump to eliminate current or future pressure loss or internal bypass, and extensive testing to ensure the pump exceeds factory specs. Three years warranty.
Core exchange option is available (we ship the part first from our inventory) for $50 surcharge plus $250 deposit. Core exchange pumps ship filled with fluid, for plug-and-play installation.
p/n: 54347299838
Price
$900.00
This special core exchange option includes a $300 refundable core deposit, i. e., you pay $650 plus $300 deposit. These pumps have been rebuilt and upgraded. The electric motor has been replaced or rewound if necessary. Two new high-current relay have been installed, and all hydraulic valves and solenoids serviced. The internal seals in the pumps have been upgraded to eliminate current or future pressure loss or internal leak.
BMW 1-Series (E88 chassis) hydro unit/convertible top pump
Price
$950.00
Rebuild/upgrade service for left bow tension cylinder in 2000 - 2006| BMW E46 convertible chassis
It is highly recommended to upgrade the bow tension cylinders in pairs. You send in your cylinder(s) first.
Price
$125.00
Rebuild/Upgrade Service for Left Main Lift Cylinder for BMW E88 1-Series.
Send in your part(s) first, or select "Order now with core exchange" to order from our inventory. Core exchange orders are subject to a $50 inventory surcharge as well as a $120 refundable core deposit.
Replaced and improved rod seals, piston seals, cap seals, gland seals, wipers, and port seals make these parts better than brand new ones, with an expected service life of 30-50 years under normal circumstances.
P/N: 54347190665
Price
$200.00
You send in your malfunctioning BMW 2-Series (F23) hydro unit, and Top Hydraulics rebuilds it. The rebuild includes electric motor replacement or rewinding if necessary, a new high-current relay, service of hydraulic valves, and upgrade of internal seals in the pump to eliminate current or future pressure loss or internal bypass. Three years warranty.
P/N 54-34-7-421-753, aka 7310756, aka 541090, aka 54347421753
Price
$600.00
Expedited Core Exchange Option where Top Hydraulics ships parts from our inventory first is $700 plus a $300 Refundable Core Charge.
These pumps have been rebuilt and upgraded. The electric motor has been replaced or rewound if necessary. A new high-current relay has been installed, and all hydraulic valves serviced. The internal seals in the pumps have been upgraded to eliminate current or future pressure loss or internal leak. Three years warranty.
P/N 54-34-7-421-753, aka 7310756, aka 541090, aka 54347421753
Price
$1,000.00
Rebuild/Upgrade service for your 2002-2009 BMW 7-Series Hydraulic Trunk Lid Cylinder.
Send us your part first and we will rebuild and upgrade it to better-than-new condition.
3-year warranty!
Cylinder only - pump would be separate.
Price
$180.00
BMW E46 1998-2006|330ci, 325ci, 323ci, M3, etc
Rebuild service for Hydraulic Valve Block aka Control Unit BMW p/n 54347025592
Send in your part for for rebuild/upgrade service, or get immediate shipment from our inventory if you choose optional core exchange.
Price
$350.00
You send in your malfunctioning E63/E64 6-Series hydraulic pump unit, and Top Hydraulics rebuilds it. The rebuild includes electric motor replacement or rewinding if necessary, service of hydraulic and solenoid valves, service of moving parts and replacement as necessary, upgrade of internal seals in the pump to eliminate current or future pressure loss or internal bypass, and extensive testing to ensure the pump exceeds factory specs. Three years warranty.
p/n: 54347154648
Core exchange option is available (we ship the part first from our inventory) for $50 surcharge plus $250 deposit. Core exchange pumps ship filled with fluid, for plug-and-play installation.
Price
$900.00
New, Extended Hydraulic Line # 23 for 2000-2006 BMW E46 convertibles.
Extended version of the OEM hose, which greatly reduces labor needed to replace and eliminates the same manufacturing/design error seen with this hose originally in your 3-Series Convertible. Only available from Top Hydraulics.
Price
$199.99
Rebuild/Upgrade Service for Right Main Lift Cylinder for BMW F23 2-Series.
Send in your part(s) first, or select "Order now with core exchange" to order from our inventory. Core exchange orders are subject to a $50 inventory surcharge as well as a $120 refundable core deposit.
Replaced and improved rod seals, piston seals, cap seals, gland seals, wipers, and port seals make these parts better than brand new ones, with an expected service life of 30-50 years under normal circumstances.
P/N: 54347421756
Price
$200.00
This is a special Core exchange option only.
We ship you a pair of E46 Bow Tension Cylinders from our inventory, and you send us back your old parts for a refund of your $300 deposit.
NOTE: If you have a 2003 model, we will need to know if your left bow tension cylinder has a detachable (clip-on) aluminum line fitting before you place your order