Rebuild/Upgrade Service for your Crossfire Tonneau Cover Cylinder - send in your cylinder first

New product

Chrysler Crossfire Tonneau Cover Cylinder

This cylinder lifts the storage compartment cover. It is located near the pump, and easily removed.

The OEM cylinders will all eventually fail due to chemical decay - Top Hydraulics upgrades the seals with far superior material. Send in your cylinder(s), and get 1-3 days trun around.

Engraving on top: 1798-030-A or similar.

Chrysler p/n 5142641AA

$150.00

-+

Chrysler Crossfire Tonneau Cover Cylinder

Send in your tonneau cover cylinder to be upgraded, using the best seals available. The OEM cylinders will all eventually fail, accelerated by heat and impurities or water in the hydraulic fluid - Top Hydraulics replaces the chemically decaying seals with far superior material. You send in your cylinders, and we turn them around quickly. Sorry, core exchange option only on latch cylinders 1937500184 and 1937500084.

The full set consists of two main drive cylinders (mounted in the soft top frame), two bow tension cylinders (also mounted in the soft top frame), one tonneau cover lift cylinder, and two locking or latch cylinders (locking down the rear window and the storage cover).

Note: retract the polished shaft on the cylinder before removing the hydraulic line clips. Otherwise, an accidentally slipping tool may scratch or dent the polished shaft so deeply that we need to replace the shaft at a surcharge.

Please note: Our rebuild/upgrade service does not include service or replacement of the travel sensor(s).  If you do need a replacement sensor, we sell OEM sensors for $50 each.

 

Related Products