Rebuild/Upgrade Service for your Crossfire Left Main Lift Cylinder - send in your cylinder first
  • Rebuild/Upgrade Service for your Crossfire Left Main Lift Cylinder - send in your cylinder first
  • 5142639AA 5170015AA 5142640AA 5170014AA 5142641AA 5142641AA 05166559AA

Left Main Lift Cylinder - Chrysler Crossfire

$200.00

The OEM cylinders will all eventually fail due to chemical decay - Top Hydraulics upgrades the seals with far superior material.

Send in your left main lift cylinder to be upgraded, using the best seals available.
-OR-
Order a cylinder from our inventory with core exchange. (includes $50 inventory surcharge and $200 deposit)

Please see notes below about our core exchange options

P/N 5142639AA, sometimes marked 1757-030-A, 1757-030-B or 1757-038-B

Order Method:
Quantity

 

No sales tax for orders in the USA

 

We provide world class technical support

 

3-year standard warranty (should last decades)

Chrysler Crossfire Left Main Lift Cylinder

Send in your left main lift cylinder to be upgraded, using the best seals available.
-OR-
Order a cylinder from our inventory with core exchange. (includes $50 inventory surcharge and $200 deposit)



The OEM seals will all eventually fail, accelerated by heat and impurities or water in the hydraulic fluid - Top Hydraulics replaces the chemically decaying seals with far superior material. You send in your cylinders, and we turn them around quickly.

 

Note: retract the polished shaft on the cylinder before removing the hydraulic line clips. Otherwise, an accidentally slipping tool may scratch or dent the polished shaft so deeply that we need to replace the shaft at a surcharge.

Please note: Our rebuild/upgrade service does not include service or replacement of the travel sensor(s).  If you do need a replacement sensor, we sell OEM sensors for $50 each. 

Hydraulic line hook-up: number 13 on top and number 14 on the bottom.

If your cylinder has a white ring of corrosion at the top of the shaft where it meets the clevis then it likely has some rust damage.
The corrosion and rust damage is most often caused by water intrusion due to a failed weather seal on the vehicle.
If your cylinder has a rust-damaged shaft we can replace it, but there is an additional charge of $100 for a replacement shaft.
See the photo below for an example:

5142639AA

Specific References

Related Products:

Rebuild/Upgrade Service For '04-'08 Chrysler PT Cruiser Convertible Hydraulic Pump

 

 

 

 

Service of all moving parts with three years warranty. The pump goes through extensive testing of flow, pressure in both directions, and extended load testing to make sure it exceeds the manufacturer's specs before we ship it back.

Price
$300.00
Quick view

Hydraulic Pump rebuild Service For '07-'10 Chrysler Sebring Convertible

 

 

 

You send in your malfunctioning convertible hydraulic pump first to be rebuilt and upgraded.

Turn around time is 1-3 days, and we will ship the pump back to you by Priority U.S. Mail (2-3 days delivery time within the US).

Chrysler part number 68027037AA

Price
$350.00
Quick view

Includes $300 refundable core deposit. This is a special core exchange option only: We ship the hydraulic pump pre-filled with the correct fluid, for simple swap into your vehicle. This means you pay $500 plus $300 deposit plus shipping and we ship a pump as pictured from our inventory first, then you send back your old pump to recover the deposit.

P/N 5142638AA and similar. Mercedes p/n reference A193 800 00 30.

Price
$800.00
Quick view

Special Promotional Price!

$1000+$400 refundable core deposit

Includes $400 refundable deposit. Rebuilt & upgraded cylinders, new & superior hoses, rebuilt & upgraded pump. System ships fully assembled and filled with hydraulic fluid. This saves you a lot of labor and frustration, compared to replacing the components one by one. Outstanding value, far superior to original OEM quality.

Price
$1,400.00
Quick view

Special option: Core exchange. This means that you get a rebuilt & upgraded pump from Top Hydraulics' inventory first, then you ship back your original pump for credit of your $250 core refund. You get a pump that has been rebuilt to outlast and outperform brand new ones. Chrysler part number 68027037AA.

Price
$600.00
Quick view

Hydraulic Pump rebuild Service For '03-'08 Chrysler Crossfire Convertible

 

 

 

You send in your malfunctioning convertible hydraulic pump first to be rebuilt and upgraded.

Turn around time is 1-3 days, and we will ship the pump back to you by Priority U.S. Mail (2-3 days delivery time within the US).

P/N 5142638AA and similar. Mercedes p/n reference A193 800 00 30.

Price
$450.00
Quick view

New Hydraulic Hose Line # 14 for Chrysler Crossfire Roadsters.

This hose goes from the pump to the bottom end of the right Main Lift cylinder. Each hose has a two-digit number stamped on it in white or red ink near the metal fitting. This number is also stamped on the cylinder port where the line enters the cylinder, and on the pump retaining plate where the line enters the pump.

This is a single hose #14 from hose assembly P/N: 5142631AA

(P/N 5142631AA corresponds to the pair of hoses #13 and #14)

Price
$149.99
Quick view

You send in your Tonneau cover latch 05166559AA aka A 193 750 0183 (aka 1937500183 or A 193 750 01 83), and Top Hydraulics upgrades it with far superior seals, making it better than new!

-OR-

Order from our inventory with core exchange. (Core exchange option is subject to $30 surcharge plus $100 deposit.)

Price
$65.00
Quick view

New Hydraulic Hose Line # 21 for Chrysler Crossfire Roadsters.

This hose goes from the pump to the shaft end of the left Rear Bow cylinder. Each hose has a two-digit number stamped on it in white or red ink near the metal fitting. This number is also stamped on the cylinder port where the line enters the cylinder, and on the pump retaining plate where the line enters the pump.

This is a single hose #21 from hose assembly P/N: 5142633AA

(P/N 5142633AA corresponds to the pair of hoses #21 and #22)

Price
$149.99
Quick view

New Hydraulic Hose Line # 13 for Chrysler Crossfire Roadsters.

This hose goes from the pump to the shaft end of the right Main Lift cylinder. Each hose has a two-digit number stamped on it in white or red ink near the metal fitting. This number is also stamped on the cylinder port where the line enters the cylinder, and on the pump retaining plate where the line enters the pump.

This is a single hose #13 from hose assembly P/N: 5142631AA

(P/N 5142631AA corresponds to the pair of hoses #13 and #14)

Price
$149.99
Quick view

New Hydraulic Hose Line # 12 for Chrysler Crossfire Roadsters.

This hose goes from the pump to the bottom end of the left Main Lift cylinder. Each hose has a two-digit number stamped on it in white or red ink near the metal fitting. This number is also stamped on the cylinder port where the line enters the cylinder, and on the pump retaining plate where the line enters the pump.

This is a single hose #12 from hose assembly P/N: 5142632AA

(P/N 5142632AA corresponds to the pair of hoses #11 and #12)

Price
$149.99
Quick view

Special Option: Core Exchange for Full Set of Chrysler Crossfire Top Hydraulic Cylinders

Special option: Core exchange. Price includes $900 deposit. This means you pay $850 plus $900 deposit plus shipping,  then you get a rebuilt & upgraded set of cylinders from Top Hydraulics' inventory first, then you ship back your original set to recover your deposit. The deposit gets refunded in full if the cores do not have serious damage to the metal parts or missing components.

Price
$1,750.00
Quick view

New Hydraulic Hose Line # 22 for Chrysler Crossfire Roadsters.

This hose goes from the pump to the blunt end of the left Rear Bow cylinder. Each hose has a two-digit number stamped on it in white or red ink near the metal fitting. This number is also stamped on the cylinder port where the line enters the cylinder, and on the pump retaining plate where the line enters the pump.

This is a single hose #22 from hose assembly P/N: 5142633AA

(P/N 5142633AA corresponds to the pair of hoses #21 and #22)

Price
$149.99
Quick view

New Hydraulic Hose Line # 24 for Chrysler Crossfire Roadsters.

This hose goes from the pump to the blunt end of the right Rear Bow cylinder. Each hose has a two-digit number stamped on it in white or red ink near the metal fitting. This number is also stamped on the cylinder port where the line enters the cylinder, and on the pump retaining plate where the line enters the pump.

This is a single hose #24 from hose assembly P/N: 5142634AA

(P/N 5142634AA corresponds to the pair of hoses #23 and #24)

Price
$149.99
Quick view

New Hydraulic Hose Line # 34 for Chrysler Crossfire Roadsters.

This hose goes from the pump to the bottom end of the Tonneau Cover Lift cylinder. Each hose has a two-digit number stamped on it in white or red ink near the metal fitting. This number is also stamped on the cylinder port where the line enters the cylinder, and on the pump retaining plate where the line enters the pump.

This is a single hose #34 from hose assembly P/N: 5142635AA

(P/N 5142635AA corresponds to the pair of hoses #33 and #34)

Price
$149.99
Quick view

Top Hydraulics' hoses are more flexible than the OEM hoses, plus they have a higher pressure rating due to their internal Kevlar® braid.

 

In your Chrysler PT Cruiser, there are two lines/hoses routed to each hydraulic cylinder. The hydraulic top system has a total of four hoses.  Each hose has a two-digit number stamped on it. Please identify the hose number when ordering.

Price
$99.99
Quick view