Rebuild/Upgrade service for your W215 CL-Class Hydraulic Trunk Opening/Closing Complete System including hydraulic pump and cylinder.
This product is no longer in stock
W215 CL-Class Hydraulic Trunk Opening/Closing Complete System Upgrade $320.
Top Hydraulics replaces the original seals with a far superior material. The cylinder is part of pump assembly p/n 2158000148 aka A 215 800 01 48. Remove the cylinder from the pump and send it to Top Hydraulics for upgrade service. Do not cut the lines - they unbolt at the pump. There is a surcharge of $50/ea. for damaged lines. In the rare event that the polished cylinder shaft has rust on it, Top Hydraulics can replace the shaft with a polished and hardened stainless steel shaft for an additional $100.
The upgrade service includes overhaul of the pump, noise reduction in the pump to a level lower than a new pump, and replacement of the electric motor if necessary. This will make the pump better than a new one.
Up-front shipping is available for W215 CL-Class Trunk Opening/Closing Complete Systems for $350 plus a $150 refundable core deposit. If the returned core should have damaged lines, then $50 per damaged line will be retained. If there should be irreparable damage from rust or tool on the cylinder housing or shaft, then the core refund will be handled on a case-by case basis.