New W209 CLK Single Hydraulic Line 31
$119.99
Goes from the pump to the top of the left storage cover lift cylinder.
This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 05 81.
Comes with o-ring, snap ring, and snap ring installation tool for installation on the pump end.
There is no o-ring required for installation on the cylinder end, and you can re-use the original hydraulic line clip
No sales tax for orders in the USA
We provide world class technical support
3-year standard warranty (should last decades)
New hydraulic line # 31 for Mercedes W209 CLK-Class
Goes from the pump to the top of the left storage cover lift cylinder (tonneau cylinder) 2098001272.
This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 05 81.
Comes with o-ring, snap ring, and snap ring installation tool for installation on the pump end.
There is no o-ring required for installation on the cylinder end, and you can re-use the original hydraulic line clip.
OEM hoses have very thin walls, which makes them fail easily. Top Hydraulics' hoses are 0.5 mm thicker, which makes them far superior without compromising ease of installation
| 2098000581 |
Specific References
Related Products:
New hydraulic line # 65 for Mercedes W209 CLK-Class
Goes from the pump to the top port (shaft end) of the front lock cylinder.
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Comes with snap ring installation tool for installation on the pump end
Price
$149.99
Goes from the pump to the bottom of the right storage cover lift cylinder.
This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 06 81.
Comes with o-ring, snap ring, and snap ring installation tool for installation on the pump end.
There is no o-ring required for installation on the cylinder end, and you can re-use the original hydraulic line clip.
Price
$149.99
Rebuild & upgrade service for Mercedes CLK A209/W209-Class
RH Top Drive (Main Lift) Cylinder
Mercedes part number 2098000872 aka A209800087264
Expedited Core Exchange Option, where we ship a part from our inventory first, is $250 plus $200 deposit.
Top Hydraulics makes these parts better than new inside, with seven new, superior seals and reinforcement against the occasional "explosion" known to happen on OEM cylinders' bottoms.
Price
$200.00
New hydraulic line # 12 for Mercedes W209 CLK-Class
This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 01 81
Goes from the pump to the left main lift cylinder 2098000772 bottom port.
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Price
$149.99
Rebuild & upgrade service for Mercedes CLK A209/W209-Class
LH Top Drive (Main Lift) Cylinder
Mercedes part number 2098000772 aka A 209 800 07 72 64.
Top Hydraulics makes these parts better than new inside, with seven new, superior seals and reinforcement against the occasional "explosion" known to happen on OEM cylinders' bottoms.
For optional up-front shipping (also known as core exchange), select YES in the drop down menu - core exchange is $250/ea. plus a $200 deposit.
Price
$200.00
Top Hydraulics replaces and upgrades all seals with superior material, making the top cylinders in your convertible better than brand new ones. We upgrade the cheap, tiny rod seals with much larger cup seals for maximum service life and for much better tolerance of imperfections on the cylinder shafts. Awesome package deal!
The $1000 price listed is for rebuild/upgrade service (you send your cylinders to be rebuilt).
The price for our core exchange option is $1200 plus a $900 deposit.
Price
$1,000.00
New hydraulic lines #65 and #66 for Mercedes W209 CLK-Class
These are the two lines that run from the pump to the front lock cylinder.
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Comes with snap ring installation tool for installation on the pump end
A2098000781
Price
$249.99
New hydraulic line # 24 for Mercedes W209 CLK-Class
This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 04 81.
Goes from the pump to the bottom of the right bow tension cylinder 2098000972.
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Price
$149.99
Rebuild & upgrade service for Mercedes CLK A209/W209-Class
Fabric Bow Tension Cylinder
Mercedes part number 2098000972, aka A209 800 09 72
Top Hydraulics makes these parts better than new inside, with seven new, superior seals and reinforcement against the occasional "explosion" known to happen on OEM cylinders' bottoms.
Core exchange is available, see below
Price
$150.00
Price listed is for Standard Rebuild Service-
Send in your cylinder for Rebuild & Upgrade service ($200), or select the core exchange option, which is $50 more plus a $200 deposit.
Beware: sometimes, people will put vise grips on the cylinder shaft in order to keep the trunk lid open. If we find scratches on the shaft that cannot be massaged out, then we are forced to replace that shaft with a new one for a $100 surcharge.
All internal seals get upgraded, guaranteed much better than a brand new part.
P/N: 209 800 14 72
Note: The power trunk lid is optional equipment. If you don't know whether or not your vehicle is equipped with this option, look for a red button on the bottom of the trunk lid. If the red power trunk button is there, your car is equipped with this cylinder.
Price
$200.00
Send in your part first for rebuild and upgrade service.
OR
Order from our stock with core exchange with additional $50 surcharge and $200 refundable deposit.
Contact us if you have an '03 or early '04 model CLK with the last six digits less than 009490
P/N 209 800 12 72
Price
$200.00
New hydraulic line # 66 for Mercedes W209 CLK-Class
Goes from the pump to the bottom line port on the front lock cylinder.
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Comes with snap ring installation tool for installation on the pump end.
Price
$149.99
New hydraulic line # 14 for Mercedes W209 CLK-Class
This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 02 81.
Goes from the pump to the bottom of the right main lift cylinder (top drive cylinder).
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Price
$149.99
New hydraulic line # 22 for Mercedes W209 CLK-Class
This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 03 81.
Goes from the pump to the bottom of the left bow tension cylinder 2098000972.
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Price
$149.99
New hydraulic line # 21 for Mercedes W209 CLK-Class
This is single hose that would normally be part of a set sold by Mercedes as p/n 209 800 03 81.
Goes from the pump to the top of the left bow tension cylinder 2098000972.
Top Hydraulics' hose material is more flexible than the OEM material and holds up to ten times the operating pressure in your convertible top hydraulic system.
Price
$149.99
Hydraulic Pump rebuild Service For '03-'09 Mercedes-Benz W209 CLK-Class
You send in your malfunctioning convertible hydraulic pump for rebuild/upgrade service.
Mercedes p/n A2098000148, A2098000248, A2098000548, A2098000648
Part numbers printed on the pumps are typically A2098000130, A2098000230, A2098000330 or A2098000630, which are not actual Mercedes part numbers.
Please note that there is a $200 surcharge for the fairly rare pump version with power trunk option (part number A2098000130/A2098000648), which was optional equipment on model years 2007-2009.
Price
$600.00
Goes from the pump to the top of the left storage cover lift cylinder.
This is a single hose that would normally be part of a set sold by Mercedes as p/n 209 800 05 81.
Comes with o-ring, snap ring, and snap ring installation tool for installation on the pump end.
There is no o-ring required for installation on the cylinder end, and you can re-use the original hydraulic line clip